MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

FD-501 (26-3131)

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Revision as of 16:26, 15 January 2013 by Luis46coco (talk | contribs)
Jump to navigation Jump to search
WELCOME
Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al

See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.

This page was last updated on 01/15/2013. Total Pages: 744. Total Files: 994.


Home / Hardware - FD-501 (26-3131)


Controler

One of the more 'modern' controllers (mounted in a shorter cartridge than the older ones), this is also the only Radio Shack model ever to feature gold-plated card-edge connectors. Due to the much higher reliability of gold contacts over tinned PC fingers, this is my personal favorite among all of the Radio Shack controllers. This model was introduced in the 1986 Radio Shack catalog.

Drive

All subsequent drives were also white in color, but were mounted horizontally and used half-height drive mechanisms. They shipped with a single drive (Drive 0) in the lower 'bay', and a blanking plate over the upper opening. These drives could be upgraded to a dual-drive system by installing the second drive kit in the existing case. Note that the kit included, and all dual-drive installations in these cases require, a 12-volt cooling fan. The units run acceptably cool with a single drive, but not with two drives. The 4 cm diameter, 1 cm thick brushless fans (as used on many CPU heatsink assemblies) work well in these cases.