MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues.
2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)
Multi-Pak Interface
| WELCOME |
|---|
| Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al |
See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.
This page was last updated on 10/3/2012. Total Pages: 744. Total Files: 994.
Home / Hardware - Multi-Pak Interface
The MULTIPAK is a peripheral that plugs into the slot of expansion of the Color Computer (cartridge port) and expands it to handle up to 4 cartridges interchangeable and can be used one at a time without having to put out one another, this exchange of the 4 slot can be done without shutting down the computer, but sometimes need to use the reset, you can even do some things with several at once
Exist the following models:
26-3024 Grey
26-3024 White
26-3124 White
There are also custom made MULTIPAK and 8 Slot MULTIPAK
To use these MULTIPAK smoothly with Color Computer 3, it takes them an improvement There are two ways:
[26-3124 MPI CoCo 3 Upgrade #1]
Besides the two that provides Cloud-9 hardware Upgrade PAL Multi-Pak, but you have to send the MULTIPAK.
Multi-Pak Upgrade for the PAL Multi-Pak 26-3024 $ 10 + s/h
Multi-Pak Hardware Upgrade for the Multi-Pak 26-3124 $ 25 + s/h
The disk controller must be used in slot 4, and while you can use
two disk controllers in the mpi problems exist