MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues.
2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)
Color Computer 3: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
The Color Computer 3 (Catalog # 26-3334) debuted on July 30, 1986, 6 years and 1 day after the debut of the | The Color Computer 3 (Catalog #26-3334) debuted on July 30, 1986, 6 years and 1 day after the debut of the original TRS-80 Color Computer. It featured an improved keyboard with standard PC style keys and four additional keys (F1, F2, CTRL, ALT) and [https://www.radioshackcatalogs.com/flipbook/c1987_rsc-17.html?fb3d-page=37 a whopping 128K for $219.95]. It was expandable up to 512K for an additional $149.95 (26-3335). This required a plug-in daughter board and the removal of the four 128K RAM chips. The circuit board was smaller than previous models and was more highly integrated. The SAM chip was replaced by a new integrated video/memory management chip, the [[GIME]] (Graphics Interrupt Memory Enhancer). A 2 MHz 68B09E replaced the standard 1 MHz 6809E. Since the CoCo derives its clock from the video clock crystal, the CoCo3 didn't run at a full 2 MHz, but at 1.79MHz, twice the original CoCo clock rate. On power up it only runs at the original clock rate; a POKE is required to initiate double speed operation. The CoCo3 was still capable of being connected to a TV, but now it also had composite and RGB (analog) video output. The RGB analog signal was a bit of a tease -- it required a specific monitor, not the then standard (and easier to get cheap used) RGB digital monitor as used by IBM PC clones. Tandy had an answer for that, they made a somewhat affordable [[CM-8]] RGBA monitor available for $299.95. There were [[Hardware#Monitors_and_displays|a few others on the market]] that would work, as the Amiga and some Commodore and Atari models used RGBA as well. I believe Tandy decided on RGBA as it was cheaper to pair with TV and composite output. | ||
original TRS-80 Color Computer. It featured an improved keyboard with standard PC style keys and four additional keys (F1, F2, CTRL, ALT) and a whopping 128K for $219.95. It was expandable up to 512K for an | |||
Another new feature is that the CoCo3 operates in all RAM mode all the time. This means that the ROMs are copied into RAM and run from there. Older CoCos that were upgraded to 64K could be run that way, but typically reserved part of their 64K memory access to read the ROMs. Part of the reason for all RAM mode was due to the copyright restrictions on Extended Color BASIC, which was written by Microsoft. A third party, Microware, wrote Super Extended Color BASIC (SECB), which was included with every CoCo3. In order to get around any copyright issues the | Another new feature is that the CoCo3 operates in all RAM mode all the time. This means that the ROMs are copied into RAM and run from there. Older CoCos that were upgraded to 64K could be run that way, but typically reserved part of their 64K memory access to read the ROMs. Part of the reason for all RAM mode was due to the copyright restrictions on Extended Color BASIC, which was written by Microsoft. A third party, Microware, wrote Super Extended Color BASIC (SECB), which was included with every CoCo3. In order to get around any copyright issues the additional SECB commands and enhancements were patched into ECB when in RAM, so the standard ECB code was left alone. | ||
The CoCo 3 was last listed in the first [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22.html?fb3d-page=50 1991 Tandy Computer Catalog (RSC-22) at $199.95 for the 128K version]. A 512K upgrade board with no RAM chips was $39.95, RAM chips were $59.95. The CM-8 monitor still listed for $299.95. The listing takes up about 1/3 of page 50 (if you include the data cassette player listing) and the CoCo isn't even listed in the quick index. Tandy issued two more Computer Catalogs in 1991: [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22a.html RSC-22A] and [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22e.html RSC-22E]. The CoCo is not listed in RSC-22A. RSC-22E is an educational market catalog and has [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22e.html?fb3d-page=25 one page of Color Computer software]. | The cheapest the CoCo 3 was offered for was [https://www.radioshackcatalogs.com/flipbook/m-sale_1989_449.html?fb3d-page=20 $129.95 in the 1989 Christmas sales flyer]. | ||
It was last listed in the first [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22.html?fb3d-page=50 1991 Tandy Computer Catalog (RSC-22) at $199.95 for the 128K version]. A 512K upgrade board with no RAM chips was $39.95, RAM chips were $59.95. The CM-8 monitor still listed for $299.95. The listing takes up about 1/3 of page 50 (if you include the data cassette player listing) and the CoCo isn't even listed in the quick index. Tandy issued two more Computer Catalogs in 1991: [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22a.html RSC-22A] and [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22e.html RSC-22E]. The CoCo is not listed in RSC-22A. RSC-22E is an educational market catalog and has [https://www.radioshackcatalogs.com/flipbook/c1991_rsc-22e.html?fb3d-page=25 one page of Color Computer software]. | |||
[[Category:Hardware]] | [[Category:Hardware]] | ||
Latest revision as of 22:16, 17 August 2024
| WELCOME |
|---|
| Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al |
See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.
This page was last updated on 08/17/2024. Total Pages: 744. Total Files: 994.
Home / Hardware - Color Computer 3
More model specific info and pics can be found here: Color Computer 3
The Color Computer 3 (Catalog #26-3334) debuted on July 30, 1986, 6 years and 1 day after the debut of the original TRS-80 Color Computer. It featured an improved keyboard with standard PC style keys and four additional keys (F1, F2, CTRL, ALT) and a whopping 128K for $219.95. It was expandable up to 512K for an additional $149.95 (26-3335). This required a plug-in daughter board and the removal of the four 128K RAM chips. The circuit board was smaller than previous models and was more highly integrated. The SAM chip was replaced by a new integrated video/memory management chip, the GIME (Graphics Interrupt Memory Enhancer). A 2 MHz 68B09E replaced the standard 1 MHz 6809E. Since the CoCo derives its clock from the video clock crystal, the CoCo3 didn't run at a full 2 MHz, but at 1.79MHz, twice the original CoCo clock rate. On power up it only runs at the original clock rate; a POKE is required to initiate double speed operation. The CoCo3 was still capable of being connected to a TV, but now it also had composite and RGB (analog) video output. The RGB analog signal was a bit of a tease -- it required a specific monitor, not the then standard (and easier to get cheap used) RGB digital monitor as used by IBM PC clones. Tandy had an answer for that, they made a somewhat affordable CM-8 RGBA monitor available for $299.95. There were a few others on the market that would work, as the Amiga and some Commodore and Atari models used RGBA as well. I believe Tandy decided on RGBA as it was cheaper to pair with TV and composite output.
Another new feature is that the CoCo3 operates in all RAM mode all the time. This means that the ROMs are copied into RAM and run from there. Older CoCos that were upgraded to 64K could be run that way, but typically reserved part of their 64K memory access to read the ROMs. Part of the reason for all RAM mode was due to the copyright restrictions on Extended Color BASIC, which was written by Microsoft. A third party, Microware, wrote Super Extended Color BASIC (SECB), which was included with every CoCo3. In order to get around any copyright issues the additional SECB commands and enhancements were patched into ECB when in RAM, so the standard ECB code was left alone.
The cheapest the CoCo 3 was offered for was $129.95 in the 1989 Christmas sales flyer.
It was last listed in the first 1991 Tandy Computer Catalog (RSC-22) at $199.95 for the 128K version. A 512K upgrade board with no RAM chips was $39.95, RAM chips were $59.95. The CM-8 monitor still listed for $299.95. The listing takes up about 1/3 of page 50 (if you include the data cassette player listing) and the CoCo isn't even listed in the quick index. Tandy issued two more Computer Catalogs in 1991: RSC-22A and RSC-22E. The CoCo is not listed in RSC-22A. RSC-22E is an educational market catalog and has one page of Color Computer software.